1、

the height ratio between the red signal and black, which determined the metal loss of pipe cross section

并且红色信号和黑色信号的比值确定了金属损失面积的大小。

互联网摘选

2、

On the Cross-section Types of Flexible Pipe Joint Washers

管道柔性接口密封圈的截面型式

互联网摘选

3、

correction of throttling metering gear installed on pipe with noncircular cross section in gasworks

煤气厂内非圆截面下节流计量装置的修正

互联网摘选

4、

the steel-plastic pipe also has this similar cloth- rived effect existed at its cut-off cross section.

对于钢塑管来说,其切断端面处同样存在类似的“撕布效应”;

互联网摘选

5、

wall thickness. the actual wall thickness of a tubular product caused by variations in pipe roundness, cross-section or eccentricity .

壁厚。由于管子圆度、截面或偏心等因素变化而导致的管材实际壁厚。

互联网摘选

6、

Cross Section Distribution of Grains in the Spiral Pipe Flow with Sands

挟沙螺旋管流的沙质断面分布

互联网摘选

7、

the initial form of brb is composed of core material of low yield and steel pipe filled with concrete. in present, the core section type of the most popular brb are ─ and+. recently, t-shaped cross section appeared.

最初的BRB形式是由低屈服材质的芯材和内填混凝土的钢管组成,目前最为流行的BRB为内核芯材截面形式为&和+字形两种,最近还出现了T形截面。

互联网摘选

8、

Since the strain hardenability of coiled tubing is low, and the plastic deformation of drill pipe is limited, the hardenability and the change of cross section area of drill pipe effected by plastic deformation can be neglected practically.

结果表明,由于连续管材料变形强化度低,钻杆塑性变形有限,在分析钻杆反复弯曲应力状态时,可不考虑强化和塑性变形的面积效应。

互联网摘选

9、

An optimum combination of forming parameters of expanding-ratio, diameter of sectorial die and corner radius of die rim is concluded from a functional relation between roundness error of cross-section and forming parameters for the process of mechanical expanding of large diameter line pipe in the paper.

针对大直径管线钢管机械扩径工艺,得到了以最终制品形状精度(横断面圆度误差)为优化目标的扩径率、模具直径和模具边缘圆角半径等成形参数的最优组合。

互联网摘选

10、

Numerical simulation analysis of pipe in earth covering to large cross-section flat-top burial tunnel

平顶暗挖隧道覆土层内管线数值模拟分析

互联网摘选

11、

Dieless Drawing Technique for Making Tapered Pipe With Square Cross Section cut or shape with a die.

一种新型的锥形方管无模拉伸成形工艺用一块钢模砍或使之成形。

互联网摘选

13、
14、

The evaporation model of micro heat pipe with triangular cross section was presented by analyzing both the heat transfer through the thin liquid film and the heat conduction along the heat pipe wall.

通过对薄液膜蒸发传热以及热管壁轴向导热的分析,对三角形截面微型热管的蒸发段建立了蒸发传热模型。

互联网摘选

15、

Choice of the Best Cross Section Area Ratio of Gating System for Malleable Iron Pipe Fittings

玛钢管件浇注系统最佳断面比例的选择

互联网摘选

16、

the engineer calculated the free cross-sectional area of the pipe.

工程师计算了管道的自由横截面积。

AI例句精选

17、

the engineer calculated the horizontal cross-sectional area of the pipe.

工程师计算了管道的水平横截面积。

AI例句精选

18、

A mathematical model of the unsteady flow pipe section has been built up while CWS is transported in a long pipe. By solving the model, length of the unsteady flow pipe section, pressure gradient at every cross-section and the gross energy losses can be predicted.

建立了高浓度水煤浆长距离管道输运中非稳定段里的数学模型,对模型的求解可以预测非稳定段长度、压力梯度及总的压力损失。

互联网摘选

19、

the cross-section structure in radial direction contains central plastic pipe layer, outer and inner reinforced protecting layers.

其径向断面结构包括中部塑料管层、外层增强保护膜层和内层增强保护膜层。

互联网摘选

  • 今日热词
  • 热门搜索

瑞鸿网英语词典(dict.ruihongw.com)为您提供在线翻译、英语词典、单词大全、英译汉、汉译英等英语服务!可按单词头尾、字数和词义分类查询。支持lj:关键词格式查询例句。

用户反馈
请选择反馈类型(可多选):
您的联系方式:
反馈内容:
提交成功 小编会尽快处理
回到顶部
点击反馈