strain的例句大全

Evaluation of the paradoxical sphincter contraction by a strain/ squeeze index in constipated patients

使用strain/squeeze指数评估便秘患者的肛门括约肌异常收缩

互联网

The construction process data and operational monitoring data are separately analyzed, and the contraction of the strain and creep model based on gray theory are obtained.

对施工过程中的监测数据和运营后的监测数据分别进行分析。基于灰色理论，得到应变的收缩徐变模型。

互联网

In this paper, a formula is proposed to evaluate the contraction stress and strain due to temperature variation in buildings of mixed structure based on the relationship of consistent functioning and mutual constraint among structural components.

根据混合结构房屋构件之间的相互约束以及协同工作的关系，文章提出了温度收缩应力和变形的近似计算方法。

互联网

While the confining stress is large, strain hardening, volume contraction and lateral intrusion become prevalent.

高侧向应力状态时应变硬化，体缩和侧向收缩。

互联网

It is suggested to define the strain at "convergence point" as the ultimate strain in compression for laterally unconfined concrete.

建议把收敛点的应变定义为无横向约束混凝土的极限压应变。

互联网

Study of the strain in Ge_xSi_ ( 1-x)/ Si by convergent beam electron diffraction

Ge xSi（1-x）/Si中应变的会聚束电子衍射研究

互联网

The model of the aluminum alloy wheel classified as 16 x 6.57 is built. Static stress analysis is carried out to study the influence of bolt pre-tension, centrifugal force and the cornering force to the structural as well as the distributing rule of stress and strain.

首先根据试验工况建立起16×6.5J车轮的有限元模型，通过静力分析研究螺栓预紧力、旋转离心力和试验弯矩对车轮结构强度的影响以及车轮结构的应力应变分布规律。

互联网

More results were found by experiment that the entrance angle of die has different Bagley end correction and recoverable elastic strain on different experimental materials.

通过实验研究进一步发现，不同的口模入口角对实验材料表现出不同的Bagley校正因子和可回复弹性应变。

互联网

Numerical Analysis of Damage of Plates Based on the Correlative Change Rate of the Strain and Strain Mode

基于应变及应变模态变化率的薄板损伤数值分析

互联网

The optimization preform shape checked by forward operation and the results show that the variation of effective strain trend to uniform, the forming force and the effective stress are decreased. 4 、 The study of multilayer metal die.

通过对优化结果进行检验，可以看出优化后的模型变形更加均匀，使得终锻模的等效应力和成形所需的动力均有所减小。4、多层金属热锻模的研究。

互联网

The temperature fields, stress-strain fields for the forming process are simulated with the rigid-viscoplastic direct coupled FEM.

利用刚-粘塑性直接耦合有限元法，通过有限元软件对成形过程温度场、应力应变场进行模拟，为合理确定工艺参数提供了科学依据。

互联网

Swing ingredients in a shaker with cracked ice, strain into a chilled cocktail glass, and garnish with a slice of lemon.

将液体注入混合器，加碎冰块摇匀，注入冷却过的鸡尾酒酒杯，用一片柠檬装饰。

互联网

In order to ensure solid motor with cracked grain to be successfully launched, the strain and stress concentration at the tips of crack should be released by shoveling slot on the crack of grain surface.

工程实际中通常采用于药柱表面裂纹处铲槽的方法来释放裂纹尖端的应力应变集中，以确保药柱含裂纹的固体发动机能正常点火发射。

互联网

From the specimen in cross-sectional view of the central and the equivalent strain along the inside corner to the lateral direction, the strain distribution is uneven. Through analyzing numerical simulation results and the deformation of the samples after the morphology and microcosmic comparison, simulation was effective.

通过数值模拟结果和变形后试样的形貌及微观组织进行对照，验证了模拟的有效性。

互联网

The Analysis on the Crossed Sensitivity of Strain v/ s Temperature of Piezoresistive Transducer

压阻式传感器的应变与温度交叉灵敏度分析

互联网

Cell-size has a significant effect not only on the crushing stress and plastic modulus of aluminum foam, but also on the strain-rate sensitivity of material of this kind.

泡孔尺寸不仅影响着材料的屈服强度和塑性模量等，还影响着材料的应变率敏感性。

互联网

The results indicate that: both strain and extrusion ratios are in direct proportion to crushing stress, while temperature is in inverse proportion to crushing stress. The more D-value of stress area s_1 and s_3 is, the more crushing stress.

结果表明，应变和挤压比与破碎应力成正比，温度与破碎应力成反比，受力面积s1与S3相差越大，破碎应力就越大。

互联网

It is shown in the static and dynamic compression stress-strain results, the curve has a typical three stages form. There are elastic stage, plastic stage, and close-grained stage after crushing.

从其静-动态压缩应力-应变曲线中可以看出，曲线是典型的三阶段形式，即弹性阶段，塑性阶段，及压溃后的密实阶段。

互联网

The coarse crystalline LC4 alloy exhibit some superplasticity under lower temperature and higher strain rate, because it can create effective recrystallization refinement.

粗晶LC4合金在较低温度和较高应变速率条件下，因能产生有效的再结晶细化，而呈现出一定的超塑性。

互联网

Determination of crystallite size and strain by X-ray powder

晶粒尺寸和应变的X射线粉末衍射法测定

互联网